How To Keep Your Wooden Worktop In Great Condition

Made from an entirely natural product, wooden worktops are a great way to give your kitchen a fashionable and organic appearance. You are able to install wooden worktops to make a classic or a contemporary look based on the overall theme you have selected and, with the ideal care that your wooden worktops will last a lifetime.

In order to keep your wooden worktop in great state, you should oil the wood before setup to help avoid bowing or warping. Oiling is a great way to produce a water resistant finish in your worktop and will make the wood more hard lasting and wearing. Oiling, unlike varnishing or lacquering, adds an unsurpassed depth and personality to your timber. A straightforward and easy procedure, it is going to protect your wood when it's fresh and rejuvenate your wood when it reaches the point at which it is looking a bit exhausted.

If it comes to selecting oil, there is a fantastic range available on the industry.

Before installing your wooden worktop, then you ought to oil each surface. It is really essential that the undersides and advantages of your worktop are not be discounted as oiling them is what's going to stop your wooden worktop from bowing or warping. On the areas of the worktop that won't be seen, just two generous coats of oil are all that is required. On the observable surface, you need to plan to employ between five and three light coats of oil to develop water resistance. Nevertheless, even after your timber was treated, you ought to mop up any water spills and splashes as swiftly as possible as water is among those things most prone to stain your timber.

The very best method to use oil into your worktop would be to pour it straight on to the wood in the direction of the grain and then work it outwards using a clean, soft, soft cotton cloth. What you are aiming for is a slim, even covering round the entire subject of the worktop. Each time you apply a coat, make it for ten minutes or so and mix it with the cloth to get a nice, even coating. If you find that the worktop looks somewhat patchy at the start, do not worry as this will even out as you build up more coats of oil. The last finish should have a much sheen to it.

You need to aim to re-oil your worktop regularly, at periods of anything between 3 and 6 months depending on how frequently your worktop is utilized. A good test of whether or not your worktop needs re-oiling, is your"bead evaluation". If that is not occurring, then it is likely time to re-oil.

If your worktop gets extremely tired appearing, it might be time for you to think about trimming down it and re-applying a number of coats of petroleum as though the worktop was fresh. You also need to keep in mind that heat and sharp objects aren't great friends of timber , so do be sure that you have and take advantage of a fantastic heating bud stand and chopping board to prevent unnecessary cutting or burning edge of the worktop.